7S71-17757-AA Front Bumper for FORD Mondeo / Mondeo Zhisheng
- Review the front bumper electrical connector before workshop approval
- Ask the workshop to compare 7S71-17757-AA without modifying brackets
- Match the pictured front bumper construction to the original FORD Mondeo / Mondeo Zhisheng part
- Measure FORD Mondeo / Mondeo Zhisheng terminal layout for fitment review
- Match 7S71-17757-AA to the removed sample at every fixing point
- Begin 7S71-17757-AA selection with a direct mounting-interface comparison
- Confirm the FORD Mondeo / Mondeo Zhisheng front bumper front, rear, left or right position where applicable
- FORD application: Mondeo / Mondeo Zhisheng
- Photograph 7S71-17757-AA from front and reverse directions
The pictured assembly is a front bumper associated with FORD Mondeo / Mondeo Zhisheng. Final approval depends on a physical and vehicle-side comparison.
FORD Product Data
| Assembly | Front Bumper |
|---|---|
| OEM replacement reference | 7S71-17757-AA |
| Car designation | FORD Mondeo / Mondeo Zhisheng |
| Inspection family | Bumper and Trim |
| Version checkpoint | electrical connector |
| Car-side checkpoint | housing depth |
| Supply format | B2B replacement-parts enquiry |
Automobile Fitment Check
The recorded reference is 7S71-17757-AA; it supports identification but does not replace inspection of terminal layout.
Market and production differences can exist within FORD Mondeo / Mondeo Zhisheng, so provide car identification evidence.
Visible Construction Review
Measure terminal layout and the front bumper outer shape for purchase-order release. Verify electrical connector with clear close-up photos. Use housing depth to separate versions that may appear similar in a front-view image.
- electrical connector
- terminal layout
- housing depth
Installation Preparation
Place the front bumper loosely in position prior to engaging every fastener. Check even alignment and clearance around the adjacent panels. Request another variant when the mounting geometry does not agree.
Quotation Preparation
Supply FORD Mondeo / Mondeo Zhisheng, quantity and receiving market in the availability request. Add a automobile-side picture and a close view of terminal layout. Verify export packing after the needed quantity is known.
Buyer Comparison Checklist
- Keep car production information with the 7S71-17757-AA enquiry.
- Examine the front bumper electrical connector with the removed FORD Mondeo / Mondeo Zhisheng assembly.
- Ask for packing data after approving the front bumper.
- Confirm housing depth at the FORD Mondeo / Mondeo Zhisheng installation opening.
- Do not force the 7S71-17757-AA version into a mismatched opening.
- Inspect the front bumper finish and visible edge condition.
- Measure the surrounding gap after loose placement of the front bumper.
- Use fixing-point close-ups to support front bumper approval.
Frequently Asked Questions
Which automobile is associated with this part?
The listed fitment is FORD Mondeo / Mondeo Zhisheng. Verify it against the automobile and existing part.
What distinguishes the intended configuration?
Review electrical connector, terminal layout and housing depth prior to decision.
How should an availability request be prepared?
Include the vehicle designation, reference when available, required quantity, destination and comparison views.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
