64900-S1500 Front Bumper Suppoer for Hyundai Santa Fe ’21 / Excel’92-’95

Front Bumper Suppoer for Hyundai Santa Fe ’21 / Excel’92-’95: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Inspection Route

This front bumper suppoer is associated with Hyundai Santa Fe ’21 / Excel’92-’95. The references 64900-S1500 support identification but do not replace a physical comparison. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should document bracket and bolt-hole spacing, capture lamp or grille openings, and document overall corner curvature before the delivery plan is confirmed. This route applies to the front bumper suppoer shown for Hyundai Santa Fe ’21 / Excel’92-’95.

If images accompany the enquiry, include a connector close-up, a fixing-point close-up, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with connector close-up to document bracket and bolt-hole spacing. A second image should show side-retainer engagement from fixing-point close-up. Before the delivery plan is confirmed, capture overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe ’21 / Excel’92-’95 vehicle record.

The procurement contact should trace lamp or grille openings from a lower-retainer view, then measure upper edge alignment below the lamps before the delivery plan is confirmed. The receiving technician should trace upper edge alignment below the lamps from an installation-opening picture, then photograph lamp or grille openings before the stock request is released. The receiving technician should photograph upper edge alignment below the lamps from a connector close-up, then trace upper edge alignment below the lamps before the purchase order is issued. The procurement contact should photograph side-retainer engagement from a side-profile photograph, then confirm upper edge alignment below the lamps before the fitment decision is signed off.

Application Review

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Configuration Check

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What vehicle information should be checked first?

Application information points to Hyundai Santa Fe ’21 / Excel’92-’95. A workshop should still compare the removed item and mounting location before ordering.

How should fitment be checked before ordering?

Photograph bracket and bolt-hole spacing and the mounting area around side-retainer engagement. Combine those images with vehicle identification data for review.

How should a wholesale request be submitted?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.