64101-2B000 Panel of Water Tank for Hyundai Santa Fe’07-’08

Panel of Water Tank for Hyundai Santa Fe’07-’08: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the body inspection group.

Product Specifications

Workshop Comparison

This panel of water tank is associated with Hyundai Santa Fe’07-’08. Write 64101-2B000 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Replacement Selection Guide

• Bolt and clip locations
• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour

The receiving technician should assess bolt and clip locations, review wheel-arch or lamp clearance, and evaluate panel contour before the commercial request is submitted. This route applies to the panel of water tank shown for Hyundai Santa Fe’07-’08.

If images accompany the enquiry, include an original-label photograph, a fixing-point close-up, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with original-label photograph to assess bolt and clip locations. A second image should show opening and hole pattern from fixing-point close-up. Before the commercial request is submitted, review panel contour and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe’07-’08 vehicle record.

A vehicle inspector should document bolt and clip locations from an original-label photograph, then compare panel contour before the delivery plan is confirmed. A vehicle inspector should assess panel contour from an original-label photograph, then assess opening and hole pattern before the replacement is test-positioned. The repair planner should note opening and hole pattern from a rear mounting view, then inspect panel contour before the delivery plan is confirmed. A body-shop buyer should verify bolt and clip locations from an underside image, then note bolt and clip locations before the replacement is test-positioned.

Physical Fitment Points

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. Recorded packing is 167 × 70 × 10CM / 1PCS; reconfirm current packing when freight is quoted.

Technical Comparison Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which vehicle is this component listed for?

The associated model designation is Hyundai Santa Fe’07-’08. Confirm the body or electrical configuration relevant to this panel of water tank.

What should be compared with the removed component?

Use the old component to check bolt and clip locations and opening and hole pattern. Also state the installation side or position in the enquiry.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.