28291276 / 28291277 Tail Light Assembly for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Tail Light Assembly for Daewoo Matiz-Iii ’05 / Spark Lite ’14: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Purchase Preparation

This tail light assembly is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. Reference matching begins with 28291276 / 28291277; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The service adviser should align mounting tabs around the housing, record left or right installation position, and confirm electrical plug and pin layout before the stock request is released. This route applies to the tail light assembly shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include an underside image, an upper-edge image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with underside image to align mounting tabs around the housing. A second image should show clearance beside bumper and grille from upper-edge image. Before the stock request is released, record electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The maintenance supervisor should verify clearance beside bumper and grille from a removed-part overview, then verify lens profile and outer edge before the commercial request is submitted. The repair planner should document clearance beside bumper and grille from a vehicle-side photograph, then verify mounting tabs around the housing before the installation begins. The installation team should review clearance beside bumper and grille from a corner-profile view, then review lens profile and outer edge before the fitment decision is signed off. The maintenance supervisor should note mounting tabs around the housing from a vehicle-side photograph, then document left or right installation position before the commercial request is submitted.

Reference Check

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. Recorded packing is 70 × 36 × 50CM / 10PCS; reconfirm current packing when freight is quoted.

Replacement Selection Guide

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What is the listed vehicle application?

The listing covers Daewoo Matiz-Iii ’05 / Spark Lite ’14. Because configurations may vary, check the actual installation area before approving the tail light assembly.

What should be compared with the removed component?

Use the old component to check mounting tabs around the housing and clearance beside bumper and grille. Also state the installation side or position in the enquiry.

What should be included in a B2B enquiry?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Keep each requested product on a separate line when several parts share one shipment.