Showing 25–36 of 41 results

Five-Leaf Impeller for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM

  • Check whether Five-Leaf Impeller matches the photographed SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM construction
  • Do not finalize SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM five-leaf impeller fitment until outer contour and vehicle aperture agree
  • Validate the five-leaf impeller outline associated with Five-Leaf Impeller
  • Record surface finish when checking the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Five-Leaf Impeller option
  • Match the pictured five-leaf impeller construction to the original SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM part
  • Confirm Five-Leaf Impeller clearances beside surrounding components
  • Confirm SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM surface finish for fitment review
  • Use SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM production details to review Five-Leaf Impeller
  • Confirm the five-leaf impeller outer contour with the vehicle identification data

Front Bumper for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03

  • Do not finalize SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 front bumper fitment until overall dimensions and service access agree
  • State quantity and destination for the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 B2B enquiry
  • Review the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 opening before approving Front Bumper
  • Resolve any service access difference affecting the Front Bumper version
  • Provide installed, reverse-side and front bumper fixing-point photographs
  • Match the pictured front bumper construction to the original SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 part
  • Supply clear fixing-point evidence for the Front Bumper enquiry
  • Check Front Bumper orientation before side selection
  • Use service access to distinguish the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 front bumper version

Front Bumper for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM

  • Inspect the front bumper reverse face before accepting Front Bumper
  • Packing reference for this front bumper: 135*36*12CM/10PCS
  • Treat Front Bumper as a cross-reference, not the only fitment test
  • Verify SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM guide slots for market-variant checking
  • Photograph Front Bumper from front and reverse directions
  • Include Front Bumper in the technical approval request
  • Match the pictured front bumper construction to the original SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM part
  • SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Front Bumper OEM number is not confirmed; use physical comparison
  • Review the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM opening before approving Front Bumper

Front Bumper for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM – Version B

  • Use SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM production details to review Front Bumper
  • Compare the original SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM part with Front Bumper
  • Provide installed, reverse-side and front bumper fixing-point photographs
  • Check whether Front Bumper matches the photographed SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM construction
  • Compare outer contour while reviewing the Front Bumper configuration
  • Inspect the front bumper reverse face before accepting Front Bumper
  • Match Front Bumper to the removed sample at every fixing point
  • Record surface finish when checking the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Front Bumper option
  • Check the front bumper outer contour using the original installation point

Front Bumper Light for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM

  • Use Front Bumper Light only after connector and mounts agree
  • SUZUKI application: St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM
  • Resolve any service access difference affecting the Front Bumper Light version
  • State quantity and destination for the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM B2B enquiry
  • Record corner geometry when checking the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Front Bumper Light option
  • Confirm Front Bumper Light clearances beside surrounding components
  • Use a vehicle-side image to confirm Front Bumper Light and service access
  • Inspect the front bumper light reverse face before accepting Front Bumper Light
  • Ask the workshop to compare Front Bumper Light without modifying brackets

Grille for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03

  • SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 Grille OEM number is not confirmed; use physical comparison
  • Inspect the grille reverse face before accepting Grille
  • Match Grille to the removed sample at every fixing point
  • State quantity and destination for the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 B2B enquiry
  • Provide installed, reverse-side and grille fixing-point photographs
  • Keep Grille with the vehicle identification photograph
  • Confirm bracket profile, then verify the Grille outer edge
  • Include Grille in the technical approval request
  • Validate the grille outline associated with Grille

Headlight Assembly for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03

  • Photograph Headlight Assembly from front and reverse directions
  • Record surface finish when checking the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 Headlight Assembly option
  • Do a loose trial placement before releasing the Headlight Assembly order
  • Keep Headlight Assembly with the vehicle identification photograph
  • Treat Headlight Assembly as a cross-reference, not the only fitment test
  • Confirm the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 headlight assembly front, rear, left or right position where applicable
  • Confirm outer contour, then verify the Headlight Assembly outer edge
  • Validate the headlight assembly outline associated with Headlight Assembly
  • Compare outer contour while reviewing the Headlight Assembly configuration

Headlight Assembly for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM

  • Record terminal layout when checking the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Headlight Assembly option
  • Use housing depth to distinguish the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM headlight assembly version
  • Request current headlight assembly carton dimensions and pieces per carton
  • Component under review: Headlight Assembly
  • Validate the headlight assembly outline associated with Headlight Assembly
  • Confirm electrical connector, then verify the Headlight Assembly outer edge
  • Confirm SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM terminal layout for purchase-order release
  • Match the pictured headlight assembly construction to the original SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM part
  • SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Headlight Assembly OEM number is not confirmed; use physical comparison

Light Frame for SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno ’95/ESTEEM

  • Begin Light Frame selection with a direct mounting-interface comparison
  • Include Light Frame in the technical approval request
  • Use a vehicle-side image to confirm Light Frame and edge alignment
  • Compare retaining clips while reviewing the Light Frame configuration
  • SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Light Frame OEM number is not confirmed; use physical comparison
  • Record reverse-side ribs when checking the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM Light Frame option
  • Use edge alignment to distinguish the SUZUKI St90 Pick-up/van Sj 410 Jeep / Da 71 Van Pick-up Sk410 / Baleno '95/ESTEEM light frame version
  • Packing reference for this light frame: 90*42*47CM/100PCS
  • Validate the light frame outline associated with Light Frame

Rear Fog Light for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03

  • Use adjacent panel gap to distinguish the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 rear fog light version
  • Review the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 opening before approving Rear Fog Light
  • Confirm attachment points, then verify the Rear Fog Light outer edge
  • Treat Rear Fog Light as a cross-reference, not the only fitment test
  • State quantity and destination for the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 B2B enquiry
  • Match Rear Fog Light to the removed sample at every fixing point
  • Match the pictured rear fog light construction to the original SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 part
  • Inspect guide slots before preparing a quotation for Rear Fog Light
  • Provide installed, reverse-side and rear fog light fixing-point photographs

Rear Fog Light for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03 – Version B

  • Check Rear Fog Light orientation before side selection
  • Photograph Rear Fog Light from front and reverse directions
  • Check whether Rear Fog Light matches the photographed SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 construction
  • Confirm bracket profile, then verify the Rear Fog Light outer edge
  • SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 Rear Fog Light OEM number is not confirmed; use physical comparison
  • Match Rear Fog Light to the removed sample at every fixing point
  • Inspect the rear fog light bracket profile against the removed component
  • Match the pictured rear fog light construction to the original SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 part
  • Inspect locating holes before preparing a quotation for Rear Fog Light

Rear Fog Light for SUZUKI Baleno ’95/ESTEEM / Baleno Xg/aerio Liana ’03 – Version C

  • Include Rear Fog Light in the technical approval request
  • Check Rear Fog Light orientation before side selection
  • Confirm Rear Fog Light clearances beside surrounding components
  • Do not finalize SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 rear fog light fitment until attachment points and adjacent panel gap agree
  • Component under review: Rear Fog Light
  • Match the pictured rear fog light construction to the original SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 part
  • Request current rear fog light carton dimensions and pieces per carton
  • Inspect SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 guide slots for installation planning
  • Use adjacent panel gap to distinguish the SUZUKI Baleno '95/ESTEEM / Baleno Xg/aerio Liana '03 rear fog light version

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue