Showing 13–24 of 45 results

Fog Light for NISSAN Sunny ’14 / Tida ’05 / Tida ’08

  • Compare bracket profile while reviewing the Fog Light configuration
  • Measure the fog light bracket profile using the original installation point
  • Use a vehicle-side image to confirm Fog Light and panel clearance
  • Confirm bracket profile, then verify the Fog Light outer edge
  • Validate the fog light outline associated with Fog Light
  • Review the NISSAN Sunny '14 / Tida '05 / Tida '08 opening before approving Fog Light
  • Include Fog Light in the technical approval request
  • Ask the workshop to compare Fog Light without modifying brackets
  • Check whether Fog Light matches the photographed NISSAN Sunny '14 / Tida '05 / Tida '08 construction

Front Bumper for NISSAN Sunny ’14 / Tida ’05 / Tida ’08

  • Validate the front bumper outline associated with Front Bumper
  • Confirm the NISSAN Sunny '14 / Tida '05 / Tida '08 front bumper front, rear, left or right position where applicable
  • Confirm retaining clips, then verify the Front Bumper outer edge
  • Confirm Front Bumper clearances beside surrounding components
  • NISSAN Sunny '14 / Tida '05 / Tida '08 Front Bumper OEM number is not confirmed; use physical comparison
  • Match the pictured front bumper construction to the original NISSAN Sunny '14 / Tida '05 / Tida '08 part
  • Check the front bumper retaining clips during a dry fit
  • Component under review: Front Bumper
  • Use a vehicle-side image to confirm Front Bumper and edge alignment

Front Bumper for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02

  • Review the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 opening before approving Front Bumper
  • Component under review: Front Bumper
  • Do not finalize NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 front bumper fitment until outer contour and vehicle aperture agree
  • Measure NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 surface finish for quotation preparation
  • Use Front Bumper only after connector and mounts agree
  • Ask the workshop to compare Front Bumper without modifying brackets
  • Check whether Front Bumper matches the photographed NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 construction
  • Confirm outer contour, then verify the Front Bumper outer edge
  • Inspect the front bumper reverse face before accepting Front Bumper

Front Bumper for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02 – Version B

  • Supply clear fixing-point evidence for the Front Bumper enquiry
  • Keep Front Bumper with the vehicle identification photograph
  • Check Front Bumper orientation before side selection
  • Include Front Bumper in the technical approval request
  • Inspect the front bumper reverse face before accepting Front Bumper
  • Compare lens profile while reviewing the Front Bumper configuration
  • Provide installed, reverse-side and front bumper fixing-point photographs
  • Review the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 opening before approving Front Bumper
  • State quantity and destination for the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 B2B enquiry

Front Bumper for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02 – Version C

  • Check whether Front Bumper matches the photographed NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 construction
  • Validate the front bumper outline associated with Front Bumper
  • Use adjacent panel gap to distinguish the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 front bumper version
  • Record guide slots when checking the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 Front Bumper option
  • Photograph Front Bumper from front and reverse directions
  • Component under review: Front Bumper
  • Confirm attachment points, then verify the Front Bumper outer edge
  • Use a vehicle-side image to confirm Front Bumper and adjacent panel gap
  • Compare the original NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 part with Front Bumper

Front Engine Board for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02

  • Document NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 guide slots for side confirmation
  • Include Front Engine Board in the technical approval request
  • Photograph Front Engine Board from front and reverse directions
  • State quantity and destination for the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 B2B enquiry
  • Do a loose trial placement before releasing the Front Engine Board order
  • Ask the workshop to compare Front Engine Board without modifying brackets
  • Request current front engine board carton dimensions and pieces per carton
  • Compare attachment points while reviewing the Front Engine Board configuration
  • Keep Front Engine Board with the vehicle identification photograph

Grille for NISSAN Sunny ’14 / Tida ’05 / Tida ’08

  • Use edge alignment to distinguish the NISSAN Sunny '14 / Tida '05 / Tida '08 grille version
  • Verify the grille retaining clips against the removed component
  • Review the NISSAN Sunny '14 / Tida '05 / Tida '08 opening before approving Grille
  • Do a loose trial placement before releasing the Grille order
  • Begin Grille selection with a direct mounting-interface comparison
  • Compare retaining clips while reviewing the Grille configuration
  • Do not finalize NISSAN Sunny '14 / Tida '05 / Tida '08 grille fitment until retaining clips and edge alignment agree
  • Include Grille in the technical approval request
  • Confirm Grille clearances beside surrounding components

Grille for NISSAN Sunny ’14 / Tida ’05 / Tida ’08 – Version B

  • Component under review: Grille
  • Check whether Grille matches the photographed NISSAN Sunny '14 / Tida '05 / Tida '08 construction
  • Photograph Grille from front and reverse directions
  • Resolve any edge alignment difference affecting the Grille version
  • Match the pictured grille construction to the original NISSAN Sunny '14 / Tida '05 / Tida '08 part
  • Inspect the grille reverse face before accepting Grille
  • Include Grille in the technical approval request
  • Use NISSAN Sunny '14 / Tida '05 / Tida '08 production details to review Grille
  • Check Grille orientation before side selection

Grille for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02

  • Inspect the grille reverse face before accepting Grille
  • Confirm Grille clearances beside surrounding components
  • Keep Grille with the vehicle identification photograph
  • Use Grille only after connector and mounts agree
  • Ask the workshop to compare Grille without modifying brackets
  • Confirm retaining clips, then verify the Grille outer edge
  • Use a vehicle-side image to confirm Grille and edge alignment
  • Review the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 opening before approving Grille
  • Include Grille in the technical approval request

Grille for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02 – Version B

  • Supply clear fixing-point evidence for the Grille enquiry
  • Request current grille carton dimensions and pieces per carton
  • Document the grille outer contour with the vehicle identification data
  • State quantity and destination for the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 B2B enquiry
  • Ask the workshop to compare Grille without modifying brackets
  • Do not finalize NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 grille fitment until outer contour and vehicle aperture agree
  • Record surface finish when checking the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 Grille option
  • Inspect the grille reverse face before accepting Grille
  • NISSAN application: Tida '08 / Tida '11 / Urvan/caravan E24 '02

Headlight Assembly for NISSAN Sunny ’14 / Tida ’05 / Tida ’08

  • Record fastener spacing when checking the NISSAN Sunny '14 / Tida '05 / Tida '08 Headlight Assembly option
  • Check whether Headlight Assembly matches the photographed NISSAN Sunny '14 / Tida '05 / Tida '08 construction
  • Use Headlight Assembly only after connector and mounts agree
  • Compare mounting tabs while reviewing the Headlight Assembly configuration
  • Component under review: Headlight Assembly
  • State quantity and destination for the NISSAN Sunny '14 / Tida '05 / Tida '08 B2B enquiry
  • Match the pictured headlight assembly construction to the original NISSAN Sunny '14 / Tida '05 / Tida '08 part
  • Validate the headlight assembly outline associated with Headlight Assembly
  • Provide installed, reverse-side and headlight assembly fixing-point photographs

Headlight Assembly for NISSAN Tida ’08 / Tida ’11 / Urvan/caravan E24 ’02

  • Treat Headlight Assembly as a cross-reference, not the only fitment test
  • Compare the original NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 part with Headlight Assembly
  • Include Headlight Assembly in the technical approval request
  • NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 Headlight Assembly OEM number is not confirmed; use physical comparison
  • Use left/right orientation to distinguish the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 headlight assembly version
  • Compare lens profile while reviewing the Headlight Assembly configuration
  • Check whether Headlight Assembly matches the photographed NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 construction
  • Record seal boundary when checking the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 Headlight Assembly option
  • State quantity and destination for the NISSAN Tida '08 / Tida '11 / Urvan/caravan E24 '02 B2B enquiry

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue