23397792 Front Bumper Stripe for Daewoo Malibu ’12 / Malibu 2016 Xl

Front Bumper Stripe for Daewoo Malibu ’12 / Malibu 2016 Xl: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Purchase Preparation

This front bumper stripe is associated with Daewoo Malibu ’12 / Malibu 2016 Xl. Write 23397792 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The installation team should mark overall corner curvature, capture bracket and bolt-hole spacing, and align upper edge alignment below the lamps before the commercial request is submitted. This route applies to the front bumper stripe shown for Daewoo Malibu ’12 / Malibu 2016 Xl.

If images accompany the enquiry, include a full component outline, a corner-profile view, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with full component outline to mark overall corner curvature. A second image should show lamp or grille openings from corner-profile view. Before the commercial request is submitted, capture upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Daewoo Malibu ’12 / Malibu 2016 Xl vehicle record.

A workshop estimator should note lamp or grille openings from a connector close-up, then document lamp or grille openings before the purchase order is issued. The parts coordinator should record bracket and bolt-hole spacing from an original-label photograph, then evaluate overall corner curvature before the repair schedule is finalized. The repair planner should document overall corner curvature from an adjacent-panel image, then review upper edge alignment below the lamps before the carton is allocated. The procurement contact should confirm side-retainer engagement from a straight-on view, then compare lamp or grille openings before the purchase order is issued.

Replacement Selection Guide

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Procurement Checklist

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which Hyundai model does this page cover?

Application information points to Daewoo Malibu ’12 / Malibu 2016 Xl. A workshop should still compare the removed item and mounting location before ordering.

How should fitment be checked before ordering?

Review overall corner curvature first, then inspect lamp or grille openings on the vehicle. Clear photographs help the supplier assess the required version.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Providing the vehicle record at the start reduces follow-up questions during quotation.