20809862 / 20809861 Rear Bumper Bracket for Daewoo Cruze ’17 / Malibu ’12

Rear Bumper Bracket for Daewoo Cruze ’17 / Malibu ’12: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This rear bumper bracket is associated with Daewoo Cruze ’17 / Malibu ’12. If 20809862 / 20809861 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle Confirmation

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

A workshop estimator should record bracket and bolt-hole spacing, align lamp or grille openings, and document overall corner curvature before the commercial request is submitted. This route applies to the rear bumper bracket shown for Daewoo Cruze ’17 / Malibu ’12.

If images accompany the enquiry, include a fixing-point close-up, an adjacent-panel image, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with fixing-point close-up to record bracket and bolt-hole spacing. A second image should show side-retainer engagement from adjacent-panel image. Before the commercial request is submitted, align overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Cruze ’17 / Malibu ’12 vehicle record.

A collision-repair specialist should review overall corner curvature from a removed-part overview, then note side-retainer engagement before the repair schedule is finalized. The parts coordinator should inspect upper edge alignment below the lamps from a rear mounting view, then inspect bracket and bolt-hole spacing before the commercial request is submitted. The maintenance supervisor should verify overall corner curvature from a fastener detail, then confirm overall corner curvature before the vehicle is dismantled. A workshop estimator should measure upper edge alignment below the lamps from a lower-retainer view, then assess lamp or grille openings before the carton is allocated.

Supply Enquiry Details

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Physical Fitment Points

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Hyundai model does this page cover?

The stated vehicle is Daewoo Cruze ’17 / Malibu ’12. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Compare bracket and bolt-hole spacing, side-retainer engagement and the required installation position with the removed component. VIN or chassis details add another useful check.

What information is needed for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. State the required side or installation position where that detail applies.