90018155 Rear Fog Light for Daewoo Cruze ’17 / Malibu ’12

Rear Fog Light for Daewoo Cruze ’17 / Malibu ’12: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Technical Comparison Notes

This rear fog light is associated with Daewoo Cruze ’17 / Malibu ’12. If 90018155 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position

The receiving technician should capture clearance beside bumper and grille, measure lens profile and outer edge, and trace left or right installation position before the purchase order is issued. This route applies to the rear fog light shown for Daewoo Cruze ’17 / Malibu ’12.

If images accompany the enquiry, include a vehicle-side photograph, a full component outline, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with vehicle-side photograph to capture clearance beside bumper and grille. A second image should show electrical plug and pin layout from full component outline. Before the purchase order is issued, measure left or right installation position and note any difference from the removed component. Keep these observations with the Daewoo Cruze ’17 / Malibu ’12 vehicle record.

The service adviser should measure electrical plug and pin layout from an installation-opening picture, then trace lens profile and outer edge before the repair schedule is finalized. The procurement contact should cross-check clearance beside bumper and grille from a lower-retainer view, then assess clearance beside bumper and grille before the quotation is approved. The stock controller should record clearance beside bumper and grille from a chassis-plate image, then cross-check lens profile and outer edge before the fitment decision is signed off. The maintenance supervisor should photograph electrical plug and pin layout from a chassis-plate image, then inspect left or right installation position before the stock request is released.

Ordering Information

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Fitment Evidence

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What vehicle information should be checked first?

This rear fog light is listed for Daewoo Cruze ’17 / Malibu ’12. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Use the old component to check clearance beside bumper and grille and electrical plug and pin layout. Also state the installation side or position in the enquiry.

What information is needed for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.