Front Bumper Support for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Front Bumper Support for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Technical Comparison Notes

This front bumper support is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. The OEM field remains blank; do not substitute a stock code or sequence number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should mark bracket and bolt-hole spacing, align lamp or grille openings, and evaluate overall corner curvature before the vehicle is dismantled. This route applies to the front bumper support shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include a rear mounting view, a vehicle-side photograph, and a full component outline. Label the evidence with the vehicle designation Daewoo Hrv / Lacetti / Lemans ’96 / Tico so the workshop and purchasing team review one configuration.

The parts coordinator can begin with rear mounting view to mark bracket and bolt-hole spacing. A second image should show side-retainer engagement from vehicle-side photograph. Before the vehicle is dismantled, align overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

The parts coordinator should verify side-retainer engagement from a removed-part overview, then measure side-retainer engagement before the delivery plan is confirmed. A workshop estimator should document lamp or grille openings from an installation-opening picture, then mark upper edge alignment below the lamps before the carton is allocated. A body-shop buyer should cross-check upper edge alignment below the lamps from a rear mounting view, then note lamp or grille openings before the carton is allocated. The parts coordinator should trace side-retainer engagement from an original-label photograph, then mark lamp or grille openings before the delivery plan is confirmed.

Purchase Preparation

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Identification Summary

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

How should the model application be interpreted?

The recorded application is Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Confirm trim, market specification and the removed front bumper support before purchase.

How can an incorrect order be avoided?

Ask the workshop to inspect bracket and bolt-hole spacing together with side-retainer engagement. VIN or chassis information can clarify market-specific differences.

How should a wholesale request be submitted?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. The supplier can then review the product version, carton requirements and delivery options.