96160175 / 96160174 Headlight Assembly(Crystal) for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Headlight Assembly(Crystal) for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Replacement Selection Guide

This headlight assembly(crystal) is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Reference matching begins with 96160175 / 96160174; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille

The maintenance supervisor should measure lens profile and outer edge, note electrical plug and pin layout, and cross-check clearance beside bumper and grille before the delivery plan is confirmed. This route applies to the headlight assembly(crystal) shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include a full component outline, a fastener detail, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with full component outline to measure lens profile and outer edge. A second image should show mounting tabs around the housing from fastener detail. Before the delivery plan is confirmed, note clearance beside bumper and grille and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

The stock controller should confirm left or right installation position from a full component outline, then inspect left or right installation position before the replacement is test-positioned. The procurement contact should verify mounting tabs around the housing from a chassis-plate image, then document electrical plug and pin layout before the replacement is test-positioned. The service adviser should trace clearance beside bumper and grille from a removed-part overview, then verify clearance beside bumper and grille before the purchase order is issued. The procurement contact should trace left or right installation position from an upper-edge image, then photograph lens profile and outer edge before the replacement is test-positioned.

Identification Summary

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. Recorded packing is 73 × 47 × 42CM / 6PCS; reconfirm current packing when freight is quoted.

Technical Comparison Notes

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

This headlight assembly(crystal) appears under Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Review the exact vehicle version rather than relying on the model name by itself.

How should fitment be checked before ordering?

Fitment evidence should show lens profile and outer edge, mounting tabs around the housing and the position where the component will be installed.

What information helps confirm availability?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Packing and freight can be discussed after the component version has been identified.