96387725 / 96387724 Tail Light Assembly Curve for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Tail Light Assembly Curve for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Replacement Selection Guide

This tail light assembly curve is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Retain the complete sequence 96387725 / 96387724 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

The parts coordinator should photograph electrical plug and pin layout, photograph mounting tabs around the housing, and note lens profile and outer edge before the replacement is test-positioned. This route applies to the tail light assembly curve shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include an adjacent-panel image, an underside image, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with adjacent-panel image to photograph electrical plug and pin layout. A second image should show left or right installation position from underside image. Before the replacement is test-positioned, photograph lens profile and outer edge and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

The service adviser should compare lens profile and outer edge from a fixing-point close-up, then inspect electrical plug and pin layout before the installation begins. The procurement contact should record left or right installation position from a full component outline, then verify electrical plug and pin layout before the quotation is approved. A body-shop buyer should measure left or right installation position from an upper-edge image, then measure lens profile and outer edge before the packing plan is prepared. The parts coordinator should review clearance beside bumper and grille from a vehicle-side photograph, then measure left or right installation position before the repair schedule is finalized.

Part Recognition Guide

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 84 × 50 × 58CM / 20PCS; reconfirm current packing when freight is quoted.

Commercial Request Details

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which vehicle is this component listed for?

The stated vehicle is Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What evidence is useful for a fitment review?

Compare electrical plug and pin layout, left or right installation position and the required installation position with the removed component. VIN or chassis details add another useful check.

What information helps confirm availability?

Send the order volume and destination together with VIN or chassis information where available. Add vehicle details so availability and packing can be checked against the requested version.