Door Moulding for Daewoo Lanos I / Ii
- Cross-check door or bumper position
- Review the vehicle record before purchasing
- Evaluate visible contour and finish
- Quotation input: quantity plus destination
- Packing entry: 90 × 30 × 29CM / 20SET
- Door Moulding application: Daewoo Lanos I / Ii
- Workshop route: the repair planner should note door or bumper position before the packing plan is prepared
Door Moulding for Daewoo Lanos I / Ii: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the trim inspection group.
Product Specifications
| Product name | Door Moulding |
|---|---|
| Vehicle model | Daewoo Lanos I / Ii |
| Component area | Trim |
| Primary comparison | door or bumper position |
| Secondary comparison | mounting-hole spacing |
| Packing information | 90 × 30 × 29CM / 20SET |
| Fitment confirmation | the repair planner should note base footprint before the packing plan is prepared |
Part Recognition Guide
This door moulding is associated with Daewoo Lanos I / Ii. An OEM number cannot be quoted here; confirm the part through geometry and chassis information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.
Vehicle Confirmation
- Door or bumper position
- Visible contour and finish
- Mounting-hole spacing
- Base footprint
- Clip or fastener arrangement
Component Matching Record
Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. Recorded packing is 90 × 30 × 29CM / 20SET; reconfirm current packing when freight is quoted.
Installation Planning
Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.
Product Questions and Answers
Which vehicle record belongs with this product?
The recorded application is Daewoo Lanos I / Ii. Confirm trim, market specification and the removed door moulding before purchase.
How can an incorrect order be avoided?
Ask the workshop to inspect door or bumper position together with mounting-hole spacing. VIN or chassis information can clarify market-specific differences.
What should a distributor send for a quotation?
Distributors may request pricing by stating volume, destination and the vehicle identification data held. The supplier can then review the product version, carton requirements and delivery options.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
