Alternate Fog Light for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii

Alternate Fog Light for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Repair Planning Notes

This alternate fog light is associated with Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii. This page does not assign a replacement number where none is supplied; visual checks remain necessary. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The stock controller should verify mounting tabs around the housing, verify left or right installation position, and cross-check electrical plug and pin layout before the purchase order is issued. This route applies to the alternate fog light shown for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii.

If images accompany the enquiry, include a straight-on view, a side-profile photograph, and a connector close-up. Label the evidence with the vehicle designation Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii so the workshop and purchasing team review one configuration.

The stock controller can begin with straight-on view to verify mounting tabs around the housing. A second image should show clearance beside bumper and grille from side-profile photograph. Before the purchase order is issued, verify electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii vehicle record.

The installation team should review mounting tabs around the housing from an installation-opening picture, then mark electrical plug and pin layout before the carton is allocated. A body-shop buyer should compare lens profile and outer edge from an installation-opening picture, then assess clearance beside bumper and grille before the delivery plan is confirmed. The installation team should document mounting tabs around the housing from a chassis-plate image, then measure left or right installation position before the packing plan is prepared. The importing distributor should inspect left or right installation position from a straight-on view, then review electrical plug and pin layout before the quotation is approved.

Inspection Route

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Procurement Checklist

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle record belongs with this product?

This alternate fog light appears under Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii. Review the exact vehicle version rather than relying on the model name by itself.

Which details help confirm the correct version?

Ask the workshop to inspect mounting tabs around the housing together with clearance beside bumper and grille. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.