96169765 Back Bumper for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08

Back Bumper for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This back bumper is associated with Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. Include 96169765 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

A collision-repair specialist should review bracket and bolt-hole spacing, record lamp or grille openings, and trace overall corner curvature before the vehicle is dismantled. This route applies to the back bumper shown for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08.

If images accompany the enquiry, include a connector close-up, an upper-edge image, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with connector close-up to review bracket and bolt-hole spacing. A second image should show side-retainer engagement from upper-edge image. Before the vehicle is dismantled, record overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08 vehicle record.

The stock controller should verify upper edge alignment below the lamps from a fastener detail, then trace overall corner curvature before the packing plan is prepared. The service adviser should cross-check overall corner curvature from a removed-part overview, then verify bracket and bolt-hole spacing before the delivery plan is confirmed. A workshop estimator should document side-retainer engagement from a fastener detail, then trace lamp or grille openings before the repair schedule is finalized. The service adviser should verify overall corner curvature from a connector close-up, then measure lamp or grille openings before the installation begins.

Purchase Preparation

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 170 × 30 × 50CM / 3PCS; reconfirm current packing when freight is quoted.

Technical Comparison Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

How should the model application be interpreted?

This back bumper appears under Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. Review the exact vehicle version rather than relying on the model name by itself.

How should fitment be checked before ordering?

Photograph bracket and bolt-hole spacing and the mounting area around side-retainer engagement. Combine those images with vehicle identification data for review.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.