96648673 Rear Bumper Support for Daewoo Aveo ’05 / Aveo ’14

Rear Bumper Support for Daewoo Aveo ’05 / Aveo ’14: Use this listing as a practical identification record before requesting price and freight. The component belongs to the bumper inspection group.

Product Specifications

Vehicle-Side Evidence

This rear bumper support is associated with Daewoo Aveo ’05 / Aveo ’14. If 96648673 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The installation team should confirm overall corner curvature, cross-check bracket and bolt-hole spacing, and cross-check upper edge alignment below the lamps before the quotation is approved. This route applies to the rear bumper support shown for Daewoo Aveo ’05 / Aveo ’14.

If images accompany the enquiry, include a connector close-up, a fastener detail, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with connector close-up to confirm overall corner curvature. A second image should show lamp or grille openings from fastener detail. Before the quotation is approved, cross-check upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’05 / Aveo ’14 vehicle record.

The importing distributor should document side-retainer engagement from a straight-on view, then assess lamp or grille openings before the shipment is booked. The repair planner should document bracket and bolt-hole spacing from a connector close-up, then align lamp or grille openings before the packing plan is prepared. A vehicle inspector should verify upper edge alignment below the lamps from a connector close-up, then photograph upper edge alignment below the lamps before the packing plan is prepared. The installation team should verify upper edge alignment below the lamps from a vehicle-side photograph, then trace overall corner curvature before the packing plan is prepared.

Installation Planning

Keep protective wrapping in place where possible until the item has passed the initial comparison. Recorded packing is 130 × 68 × 15CM / 5PCS; reconfirm current packing when freight is quoted.

Vehicle Confirmation

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This rear bumper support is listed for Daewoo Aveo ’05 / Aveo ’14. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

Ask the workshop to inspect overall corner curvature together with lamp or grille openings. VIN or chassis information can clarify market-specific differences.

What should a distributor send for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Packing and freight can be discussed after the component version has been identified.