96179919 / 96179917 / 96179918 / 96179916 Crystal Headlight Assembly for Daewoo Espero / Espero ’96 / Aveo ’04

Crystal Headlight Assembly for Daewoo Espero / Espero ’96 / Aveo ’04: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Purchase Preparation

This crystal headlight assembly is associated with Daewoo Espero / Espero ’96 / Aveo ’04. Retain the complete sequence 96179919 / 96179917 / 96179918 / 96179916 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille

The parts coordinator should evaluate lens profile and outer edge, verify electrical plug and pin layout, and confirm clearance beside bumper and grille before the packing plan is prepared. This route applies to the crystal headlight assembly shown for Daewoo Espero / Espero ’96 / Aveo ’04.

If images accompany the enquiry, include an upper-edge image, a full component outline, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with upper-edge image to evaluate lens profile and outer edge. A second image should show mounting tabs around the housing from full component outline. Before the packing plan is prepared, verify clearance beside bumper and grille and note any difference from the removed component. Keep these observations with the Daewoo Espero / Espero ’96 / Aveo ’04 vehicle record.

A vehicle inspector should record lens profile and outer edge from a rear mounting view, then photograph electrical plug and pin layout before the vehicle is dismantled. A workshop estimator should compare electrical plug and pin layout from a rear mounting view, then mark lens profile and outer edge before the purchase order is issued. The maintenance supervisor should mark electrical plug and pin layout from a lower-retainer view, then review left or right installation position before the stock request is released. A workshop estimator should capture clearance beside bumper and grille from an adjacent-panel image, then review lens profile and outer edge before the commercial request is submitted.

Identification Summary

Measure questionable mounting distances before modifying any surrounding component. Recorded packing is 54 × 49 × 49CM / 6PCS; reconfirm current packing when freight is quoted.

Procurement Checklist

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What vehicle information should be checked first?

The associated model designation is Daewoo Espero / Espero ’96 / Aveo ’04. Confirm the body or electrical configuration relevant to this crystal headlight assembly.

How is the pictured version best verified?

Check lens profile and outer edge, confirm mounting tabs around the housing, and retain the removed part until the replacement has been compared side by side.

What information is needed for a quotation?

Send the order volume and destination together with VIN or chassis information where available. The supplier can then review the product version, carton requirements and delivery options.