95019927 Front Bumper for Daewoo Aveo ’11 / Sonic ’17 / Espero

Front Bumper for Daewoo Aveo ’11 / Sonic ’17 / Espero: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This front bumper is associated with Daewoo Aveo ’11 / Sonic ’17 / Espero. Retain the complete sequence 95019927 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The repair planner should evaluate upper edge alignment below the lamps, note overall corner curvature, and verify side-retainer engagement before the delivery plan is confirmed. This route applies to the front bumper shown for Daewoo Aveo ’11 / Sonic ’17 / Espero.

If images accompany the enquiry, include a vehicle-side photograph, an adjacent-panel image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with vehicle-side photograph to evaluate upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from adjacent-panel image. Before the delivery plan is confirmed, note side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’11 / Sonic ’17 / Espero vehicle record.

A workshop estimator should evaluate upper edge alignment below the lamps from a side-profile photograph, then evaluate overall corner curvature before the delivery plan is confirmed. A collision-repair specialist should photograph overall corner curvature from a removed-part overview, then compare bracket and bolt-hole spacing before the carton is allocated. The parts coordinator should capture overall corner curvature from an upper-edge image, then compare upper edge alignment below the lamps before the fitment decision is signed off. The maintenance supervisor should review lamp or grille openings from an original-label photograph, then measure bracket and bolt-hole spacing before the packing plan is prepared.

Part Recognition Guide

Measure questionable mounting distances before modifying any surrounding component. Recorded packing is 175 × 28 × 50CM / 3PCS; reconfirm current packing when freight is quoted.

Configuration Check

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which vehicle is this component listed for?

The stated vehicle is Daewoo Aveo ’11 / Sonic ’17 / Espero. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How can an incorrect order be avoided?

Compare upper edge alignment below the lamps, bracket and bolt-hole spacing and the required installation position with the removed component. VIN or chassis details add another useful check.

How should a wholesale request be submitted?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.