96830975 / 96830976 Tail Light Assembly for Daewoo Aveo ’11

Tail Light Assembly for Daewoo Aveo ’11: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Purchase Preparation

This tail light assembly is associated with Daewoo Aveo ’11. Use 96830975 / 96830976 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Technical Comparison Notes

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A body-shop buyer should assess mounting tabs around the housing, align left or right installation position, and compare electrical plug and pin layout before the purchase order is issued. This route applies to the tail light assembly shown for Daewoo Aveo ’11.

If images accompany the enquiry, include an installation-opening picture, a side-profile photograph, and an underside image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with installation-opening picture to assess mounting tabs around the housing. A second image should show clearance beside bumper and grille from side-profile photograph. Before the purchase order is issued, align electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’11 vehicle record.

The installation team should cross-check left or right installation position from an installation-opening picture, then assess left or right installation position before the fitment decision is signed off. The stock controller should mark clearance beside bumper and grille from an underside image, then measure left or right installation position before the packing plan is prepared. A body-shop buyer should confirm left or right installation position from a fixing-point close-up, then document electrical plug and pin layout before the commercial request is submitted. The stock controller should measure left or right installation position from an installation-opening picture, then compare lens profile and outer edge before the fitment decision is signed off.

Buyer Verification Notes

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Component Matching Record

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which vehicle is this component listed for?

Application information points to Daewoo Aveo ’11. A workshop should still compare the removed item and mounting location before ordering.

Which details help confirm the correct version?

Compare mounting tabs around the housing, clearance beside bumper and grille and the required installation position with the removed component. VIN or chassis details add another useful check.

What should a distributor send for a quotation?

Send the order volume and destination together with VIN or chassis information where available. State the required side or installation position where that detail applies.