96481330 Front Bumper for Daewoo Kalos ’02 / Aveo ’08

Front Bumper for Daewoo Kalos ’02 / Aveo ’08: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Application Review

This front bumper is associated with Daewoo Kalos ’02 / Aveo ’08. Use 96481330 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The repair planner should capture bracket and bolt-hole spacing, inspect lamp or grille openings, and compare overall corner curvature before the installation begins. This route applies to the front bumper shown for Daewoo Kalos ’02 / Aveo ’08.

If images accompany the enquiry, include a removed-part overview, a corner-profile view, and a lower-retainer view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with removed-part overview to capture bracket and bolt-hole spacing. A second image should show side-retainer engagement from corner-profile view. Before the installation begins, inspect overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Kalos ’02 / Aveo ’08 vehicle record.

A workshop estimator should note bracket and bolt-hole spacing from a side-profile photograph, then trace bracket and bolt-hole spacing before the installation begins. The installation team should note side-retainer engagement from a side-profile photograph, then assess bracket and bolt-hole spacing before the vehicle is dismantled. A workshop estimator should compare side-retainer engagement from a lower-retainer view, then measure upper edge alignment below the lamps before the installation begins. The parts coordinator should mark bracket and bolt-hole spacing from an upper-edge image, then evaluate bracket and bolt-hole spacing before the shipment is booked.

Part Recognition Guide

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. Recorded packing is 185 × 25 × 42CM / 3PCS; reconfirm current packing when freight is quoted.

Fitment Evidence

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What is the listed vehicle application?

The stated vehicle is Daewoo Kalos ’02 / Aveo ’08. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What evidence is useful for a fitment review?

Use the old component to check bracket and bolt-hole spacing and side-retainer engagement. Also state the installation side or position in the enquiry.

What information helps confirm availability?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.