42333057 Rear Bumper for Daewoo Spark ’18 Beat 4d / Kalos ’02

Rear Bumper for Daewoo Spark ’18 Beat 4d / Kalos ’02: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This rear bumper is associated with Daewoo Spark ’18 Beat 4d / Kalos ’02. A search enquiry may include 42333057; the order should also state the vehicle and required side. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

A body-shop buyer should record upper edge alignment below the lamps, compare overall corner curvature, and photograph side-retainer engagement before the stock request is released. This route applies to the rear bumper shown for Daewoo Spark ’18 Beat 4d / Kalos ’02.

If images accompany the enquiry, include a corner-profile view, a full component outline, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with corner-profile view to record upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from full component outline. Before the stock request is released, compare side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Beat 4d / Kalos ’02 vehicle record.

The maintenance supervisor should confirm side-retainer engagement from a lower-retainer view, then confirm bracket and bolt-hole spacing before the purchase order is issued. The maintenance supervisor should measure upper edge alignment below the lamps from a side-profile photograph, then capture overall corner curvature before the vehicle is dismantled. The importing distributor should measure bracket and bolt-hole spacing from a corner-profile view, then compare lamp or grille openings before the commercial request is submitted. The receiving technician should assess upper edge alignment below the lamps from an underside image, then inspect lamp or grille openings before the repair schedule is finalized.

Workshop Comparison

Photograph the original arrangement before removal when several brackets or connectors are involved. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What vehicle information should be checked first?

The listing covers Daewoo Spark ’18 Beat 4d / Kalos ’02. Because configurations may vary, check the actual installation area before approving the rear bumper.

What should be compared with the removed component?

Compare upper edge alignment below the lamps, bracket and bolt-hole spacing and the required installation position with the removed component. VIN or chassis details add another useful check.

How should a wholesale request be submitted?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.