42625940 / 42352996 Rear Bumper for Daewoo Spark ’18 Ng / Spark ’18 Beat

Rear Bumper for Daewoo Spark ’18 Ng / Spark ’18 Beat: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Supply Enquiry Details

This rear bumper is associated with Daewoo Spark ’18 Ng / Spark ’18 Beat. Compare 42625940 / 42352996 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

A body-shop buyer should assess lamp or grille openings, confirm side-retainer engagement, and align bracket and bolt-hole spacing before the packing plan is prepared. This route applies to the rear bumper shown for Daewoo Spark ’18 Ng / Spark ’18 Beat.

If images accompany the enquiry, include a full component outline, a rear mounting view, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with full component outline to assess lamp or grille openings. A second image should show upper edge alignment below the lamps from rear mounting view. Before the packing plan is prepared, confirm bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Ng / Spark ’18 Beat vehicle record.

A collision-repair specialist should document upper edge alignment below the lamps from a lower-retainer view, then measure lamp or grille openings before the installation begins. A workshop estimator should assess bracket and bolt-hole spacing from a chassis-plate image, then inspect bracket and bolt-hole spacing before the stock request is released. A body-shop buyer should trace lamp or grille openings from an upper-edge image, then align bracket and bolt-hole spacing before the carton is allocated. A vehicle inspector should document overall corner curvature from a side-profile photograph, then evaluate overall corner curvature before the packing plan is prepared.

Fitment Evidence

Photograph the original arrangement before removal when several brackets or connectors are involved. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle is this component listed for?

The associated model designation is Daewoo Spark ’18 Ng / Spark ’18 Beat. Confirm the body or electrical configuration relevant to this rear bumper.

What should be compared with the removed component?

Fitment evidence should show lamp or grille openings, upper edge alignment below the lamps and the position where the component will be installed.

What information is needed for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. The supplier can then review the product version, carton requirements and delivery options.