42458992 Fog Light for Daewoo Spark ’18 Ng / Spark ’18 Beat

Fog Light for Daewoo Spark ’18 Ng / Spark ’18 Beat: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Supply Enquiry Details

This fog light is associated with Daewoo Spark ’18 Ng / Spark ’18 Beat. For purchasing documents, quote 42458992 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

A vehicle inspector should document electrical plug and pin layout, review mounting tabs around the housing, and cross-check lens profile and outer edge before the installation begins. This route applies to the fog light shown for Daewoo Spark ’18 Ng / Spark ’18 Beat.

If images accompany the enquiry, include a corner-profile view, an installation-opening picture, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with corner-profile view to document electrical plug and pin layout. A second image should show left or right installation position from installation-opening picture. Before the installation begins, review lens profile and outer edge and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Ng / Spark ’18 Beat vehicle record.

The stock controller should evaluate electrical plug and pin layout from a lower-retainer view, then measure mounting tabs around the housing before the stock request is released. A workshop estimator should verify mounting tabs around the housing from a fixing-point close-up, then verify left or right installation position before the fitment decision is signed off. The receiving technician should measure mounting tabs around the housing from an underside image, then cross-check mounting tabs around the housing before the delivery plan is confirmed. A collision-repair specialist should mark left or right installation position from a vehicle-side photograph, then align clearance beside bumper and grille before the delivery plan is confirmed.

Configuration Check

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

Which vehicle record belongs with this product?

This page associates the fog light with Daewoo Spark ’18 Ng / Spark ’18 Beat. The vehicle record and original component should agree with the pictured version.

How can an incorrect order be avoided?

Use the old component to check electrical plug and pin layout and left or right installation position. Also state the installation side or position in the enquiry.

What information is needed for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Add vehicle details so availability and packing can be checked against the requested version.