95182608 / 95182609 Tow Cover / Rear Bumper Lamp for Daewoo Spark ’18 Ng / Spark ’18 Beat

Tow Cover / Rear Bumper Lamp for Daewoo Spark ’18 Ng / Spark ’18 Beat: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Pre-Order Inspection

This tow cover / rear bumper lamp is associated with Daewoo Spark ’18 Ng / Spark ’18 Beat. An OEM match to 95182608 / 95182609 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Supply Enquiry Details

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The procurement contact should photograph left or right installation position, record clearance beside bumper and grille, and document mounting tabs around the housing before the packing plan is prepared. This route applies to the tow cover / rear bumper lamp shown for Daewoo Spark ’18 Ng / Spark ’18 Beat.

If images accompany the enquiry, include an upper-edge image, a full component outline, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with upper-edge image to photograph left or right installation position. A second image should show lens profile and outer edge from full component outline. Before the packing plan is prepared, record mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Ng / Spark ’18 Beat vehicle record.

A vehicle inspector should cross-check clearance beside bumper and grille from a fixing-point close-up, then confirm lens profile and outer edge before the stock request is released. The procurement contact should photograph electrical plug and pin layout from a fixing-point close-up, then measure mounting tabs around the housing before the repair schedule is finalized. The service adviser should verify left or right installation position from a rear mounting view, then align lens profile and outer edge before the purchase order is issued. The repair planner should record left or right installation position from a vehicle-side photograph, then inspect clearance beside bumper and grille before the carton is allocated.

Ordering Information

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Workshop Comparison

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

How should the model application be interpreted?

This page associates the tow cover / rear bumper lamp with Daewoo Spark ’18 Ng / Spark ’18 Beat. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

Check left or right installation position, confirm lens profile and outer edge, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. State the required side or installation position where that detail applies.