95141837 Front Bumper for Daewoo Matiz ’15 / Spark ’13-’17
- Document overall corner curvature
- Examine bracket and bolt-hole spacing at the installation area
- Examine the vehicle record before purchasing
- Front Bumper application: Daewoo Matiz ’15 / Spark ’13-’17
- Trace lamp or grille openings against the removed part
- Verify upper edge alignment below the lamps
- Workshop route: a collision-repair specialist should note upper edge alignment below the lamps before the carton is allocated
Front Bumper for Daewoo Matiz ’15 / Spark ’13-’17: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.
Product Specifications
| Product name | Front Bumper |
|---|---|
| OEM replacement reference | 95141837 |
| Vehicle model | Daewoo Matiz ’15 / Spark ’13-’17 |
| Component area | Bumper |
| Primary comparison | upper edge alignment below the lamps |
| Secondary comparison | bracket and bolt-hole spacing |
| Packing information | 180 × 30 × 40CM / 5PCS |
| Fitment confirmation | a collision-repair specialist should note lamp or grille openings before the carton is allocated |
Ordering Information
This front bumper is associated with Daewoo Matiz ’15 / Spark ’13-’17. Use 95141837 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.
Vehicle Confirmation
- Upper edge alignment below the lamps
- Overall corner curvature
- Bracket and bolt-hole spacing
- Lamp or grille openings
- Side-retainer engagement
A collision-repair specialist should note upper edge alignment below the lamps, photograph overall corner curvature, and review side-retainer engagement before the carton is allocated. This route applies to the front bumper shown for Daewoo Matiz ’15 / Spark ’13-’17.
If images accompany the enquiry, include a connector close-up, a side-profile photograph, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.
A collision-repair specialist can begin with connector close-up to note upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from side-profile photograph. Before the carton is allocated, photograph side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Matiz ’15 / Spark ’13-’17 vehicle record.
The receiving technician should document overall corner curvature from an upper-edge image, then capture overall corner curvature before the installation begins. The parts coordinator should record side-retainer engagement from a connector close-up, then capture bracket and bolt-hole spacing before the delivery plan is confirmed. A body-shop buyer should cross-check side-retainer engagement from a straight-on view, then confirm overall corner curvature before the delivery plan is confirmed. The maintenance supervisor should measure side-retainer engagement from a connector close-up, then assess side-retainer engagement before the delivery plan is confirmed.
Workshop Comparison
Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. Recorded packing is 180 × 30 × 40CM / 5PCS; reconfirm current packing when freight is quoted.
Application Review
A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.
Common Workshop Questions
What model is associated with this replacement part?
The associated model designation is Daewoo Matiz ’15 / Spark ’13-’17. Confirm the body or electrical configuration relevant to this front bumper.
What should a workshop inspect before purchase?
Use the old component to check upper edge alignment below the lamps and bracket and bolt-hole spacing. Also state the installation side or position in the enquiry.
How can a trade buyer request pricing?
A complete sourcing request names the quantity, delivery market and the comparison information used. This information helps separate technical confirmation from the later shipping calculation.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
