96600191 Back Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Back Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This back bumper is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. Use 96600191 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

A vehicle inspector should cross-check side-retainer engagement, cross-check upper edge alignment below the lamps, and assess lamp or grille openings before the carton is allocated. This route applies to the back bumper shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include a rear mounting view, a fastener detail, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with rear mounting view to cross-check side-retainer engagement. A second image should show overall corner curvature from fastener detail. Before the carton is allocated, cross-check lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The receiving technician should cross-check overall corner curvature from a removed-part overview, then photograph overall corner curvature before the purchase order is issued. The parts coordinator should align lamp or grille openings from a removed-part overview, then photograph overall corner curvature before the packing plan is prepared. The stock controller should confirm lamp or grille openings from an underside image, then evaluate bracket and bolt-hole spacing before the packing plan is prepared. The procurement contact should review lamp or grille openings from a corner-profile view, then record upper edge alignment below the lamps before the fitment decision is signed off.

Commercial Request Details

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 180 × 31 × 37CM / 5PCS; reconfirm current packing when freight is quoted.

Installation Planning

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

This back bumper is listed for Daewoo Matiz-Iii ’05 / Spark Lite ’14. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Review side-retainer engagement first, then inspect overall corner curvature on the vehicle. Clear photographs help the supplier assess the required version.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. This information helps separate technical confirmation from the later shipping calculation.