Rear Door Outer Handle for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Rear Door Outer Handle for Daewoo Matiz-Iii ’05 / Spark Lite ’14: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the trim inspection group.

Product Specifications

Repair Planning Notes

This rear door outer handle is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. The OEM field remains blank; do not substitute a stock code or sequence number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Door or bumper position
• Visible contour and finish
• Mounting-hole spacing
• Base footprint
• Clip or fastener arrangement

A vehicle inspector should record door or bumper position, confirm visible contour and finish, and confirm clip or fastener arrangement before the quotation is approved. This route applies to the rear door outer handle shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include a vehicle-side photograph, a removed-part overview, and an adjacent-panel image. Label the evidence with the vehicle designation Daewoo Matiz-Iii ’05 / Spark Lite ’14 so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with vehicle-side photograph to record door or bumper position. A second image should show mounting-hole spacing from removed-part overview. Before the quotation is approved, confirm clip or fastener arrangement and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The installation team should capture base footprint from a lower-retainer view, then document mounting-hole spacing before the delivery plan is confirmed. The stock controller should mark visible contour and finish from a vehicle-side photograph, then measure door or bumper position before the purchase order is issued. A workshop estimator should measure visible contour and finish from a chassis-plate image, then document base footprint before the packing plan is prepared. A vehicle inspector should note mounting-hole spacing from a corner-profile view, then record visible contour and finish before the quotation is approved.

Commercial Request Details

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. No packing entry is published here; request current carton and quantity information with the quotation.

Supply Enquiry Details

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which Hyundai model does this page cover?

Application information points to Daewoo Matiz-Iii ’05 / Spark Lite ’14. A workshop should still compare the removed item and mounting location before ordering.

How can an incorrect order be avoided?

Review door or bumper position first, then inspect mounting-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What should be included in a B2B enquiry?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Providing the vehicle record at the start reduces follow-up questions during quotation.