28283157 Front Bumper Lower for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Front Bumper Lower for Daewoo Matiz-Iii ’05 / Spark Lite ’14: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This front bumper lower is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. Record 28283157 and compare it with the old part before asking for availability. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The repair planner should measure overall corner curvature, cross-check bracket and bolt-hole spacing, and compare upper edge alignment below the lamps before the carton is allocated. This route applies to the front bumper lower shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include an underside image, a lower-retainer view, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with underside image to measure overall corner curvature. A second image should show lamp or grille openings from lower-retainer view. Before the carton is allocated, cross-check upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The service adviser should assess bracket and bolt-hole spacing from a removed-part overview, then trace lamp or grille openings before the replacement is test-positioned. The repair planner should trace lamp or grille openings from a full component outline, then photograph overall corner curvature before the purchase order is issued. A vehicle inspector should cross-check upper edge alignment below the lamps from a full component outline, then evaluate upper edge alignment below the lamps before the repair schedule is finalized. A collision-repair specialist should assess upper edge alignment below the lamps from a chassis-plate image, then compare overall corner curvature before the installation begins.

Pre-Order Inspection

For electrical items, disconnect power according to workshop practice and compare plug orientation first. Recorded packing is 140 × 20 × 10CM / 5PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Hyundai model does this page cover?

The listing covers Daewoo Matiz-Iii ’05 / Spark Lite ’14. Because configurations may vary, check the actual installation area before approving the front bumper lower.

How can an incorrect order be avoided?

Ask the workshop to inspect overall corner curvature together with lamp or grille openings. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.