28283156 Front Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Front Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Ordering Information

This front bumper is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. Include 28283156 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The repair planner should record side-retainer engagement, note upper edge alignment below the lamps, and assess lamp or grille openings before the repair schedule is finalized. This route applies to the front bumper shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include a fixing-point close-up, a side-profile photograph, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with fixing-point close-up to record side-retainer engagement. A second image should show overall corner curvature from side-profile photograph. Before the repair schedule is finalized, note lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The importing distributor should cross-check upper edge alignment below the lamps from an adjacent-panel image, then verify side-retainer engagement before the delivery plan is confirmed. A vehicle inspector should trace lamp or grille openings from a corner-profile view, then mark bracket and bolt-hole spacing before the packing plan is prepared. The installation team should note upper edge alignment below the lamps from an installation-opening picture, then align upper edge alignment below the lamps before the vehicle is dismantled. A collision-repair specialist should measure lamp or grille openings from a corner-profile view, then assess lamp or grille openings before the replacement is test-positioned.

Part Recognition Guide

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. Recorded packing is 170 × 37 × 40 / 5PCS; reconfirm current packing when freight is quoted.

Pre-Order Inspection

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which vehicle record belongs with this product?

The recorded application is Daewoo Matiz-Iii ’05 / Spark Lite ’14. Confirm trim, market specification and the removed front bumper before purchase.

What should be compared with the removed component?

Fitment evidence should show side-retainer engagement, overall corner curvature and the position where the component will be installed.

Which details help prepare shipping terms?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. This information helps separate technical confirmation from the later shipping calculation.