Rear Bumper for Hyundai Kona N 2021 / Matiz-I ’99

Rear Bumper for Hyundai Kona N 2021 / Matiz-I ’99: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Application Review

This rear bumper is associated with Hyundai Kona N 2021 / Matiz-I ’99. Vehicle-side evidence is the primary identification route when no dependable OEM number is present. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The parts coordinator should document upper edge alignment below the lamps, capture overall corner curvature, and review side-retainer engagement before the carton is allocated. This route applies to the rear bumper shown for Hyundai Kona N 2021 / Matiz-I ’99.

If images accompany the enquiry, include an installation-opening picture, an upper-edge image, and a vehicle-side photograph. Label the evidence with the vehicle designation Hyundai Kona N 2021 / Matiz-I ’99 so the workshop and purchasing team review one configuration.

The parts coordinator can begin with installation-opening picture to document upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from upper-edge image. Before the carton is allocated, capture side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Kona N 2021 / Matiz-I ’99 vehicle record.

The maintenance supervisor should review upper edge alignment below the lamps from a fastener detail, then trace side-retainer engagement before the carton is allocated. The installation team should inspect upper edge alignment below the lamps from a straight-on view, then record bracket and bolt-hole spacing before the stock request is released. The procurement contact should inspect bracket and bolt-hole spacing from a rear mounting view, then measure side-retainer engagement before the purchase order is issued. The repair planner should photograph upper edge alignment below the lamps from a corner-profile view, then compare bracket and bolt-hole spacing before the vehicle is dismantled.

Vehicle Confirmation

Retain the removed part until the replacement has been visually compared and test-positioned. Recorded packing is 156 × 35 × 38CM / 5PCS; reconfirm current packing when freight is quoted.

Purchase Preparation

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What is the listed vehicle application?

The stated vehicle is Hyundai Kona N 2021 / Matiz-I ’99. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How is the pictured version best verified?

Photograph upper edge alignment below the lamps and the mounting area around bracket and bolt-hole spacing. Combine those images with vehicle identification data for review.

What information is needed for a quotation?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.