86512-J9NA0 Front Bumper Lower for Hyundai Kona N 2021 / Matiz-I ’99

Front Bumper Lower for Hyundai Kona N 2021 / Matiz-I ’99: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This front bumper lower is associated with Hyundai Kona N 2021 / Matiz-I ’99. Include 86512-J9NA0 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The service adviser should confirm bracket and bolt-hole spacing, align lamp or grille openings, and verify overall corner curvature before the fitment decision is signed off. This route applies to the front bumper lower shown for Hyundai Kona N 2021 / Matiz-I ’99.

If images accompany the enquiry, include a chassis-plate image, an adjacent-panel image, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with chassis-plate image to confirm bracket and bolt-hole spacing. A second image should show side-retainer engagement from adjacent-panel image. Before the fitment decision is signed off, align overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Kona N 2021 / Matiz-I ’99 vehicle record.

A vehicle inspector should inspect overall corner curvature from a rear mounting view, then measure lamp or grille openings before the fitment decision is signed off. The maintenance supervisor should record bracket and bolt-hole spacing from an underside image, then compare lamp or grille openings before the repair schedule is finalized. The stock controller should confirm lamp or grille openings from a rear mounting view, then confirm upper edge alignment below the lamps before the vehicle is dismantled. A vehicle inspector should evaluate upper edge alignment below the lamps from an installation-opening picture, then note bracket and bolt-hole spacing before the vehicle is dismantled.

Commercial Request Details

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Installation Planning

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which vehicle record belongs with this product?

Application information points to Hyundai Kona N 2021 / Matiz-I ’99. A workshop should still compare the removed item and mounting location before ordering.

Which details help confirm the correct version?

Use the old component to check bracket and bolt-hole spacing and side-retainer engagement. Also state the installation side or position in the enquiry.

What information helps confirm availability?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Packing and freight can be discussed after the component version has been identified.