86153-R9000 / 86154-R9000 Front Sdie Bumper for Hyundai Ix25 / Creta’20 / Kona

Front Sdie Bumper for Hyundai Ix25 / Creta’20 / Kona: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Workshop Comparison

This front sdie bumper is associated with Hyundai Ix25 / Creta’20 / Kona. Include 86153-R9000 / 86154-R9000 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The receiving technician should photograph side-retainer engagement, record upper edge alignment below the lamps, and compare lamp or grille openings before the commercial request is submitted. This route applies to the front sdie bumper shown for Hyundai Ix25 / Creta’20 / Kona.

If images accompany the enquiry, include a chassis-plate image, a chassis-plate image, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with chassis-plate image to photograph side-retainer engagement. A second image should show overall corner curvature from chassis-plate image. Before the commercial request is submitted, record lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Ix25 / Creta’20 / Kona vehicle record.

The service adviser should capture bracket and bolt-hole spacing from a straight-on view, then review lamp or grille openings before the purchase order is issued. The parts coordinator should assess overall corner curvature from a fastener detail, then verify side-retainer engagement before the commercial request is submitted. A body-shop buyer should confirm upper edge alignment below the lamps from a full component outline, then cross-check side-retainer engagement before the repair schedule is finalized. A body-shop buyer should trace side-retainer engagement from a full component outline, then measure overall corner curvature before the repair schedule is finalized.

Pre-Order Inspection

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What vehicle information should be checked first?

This front sdie bumper appears under Hyundai Ix25 / Creta’20 / Kona. Review the exact vehicle version rather than relying on the model name by itself.

Which details help confirm the correct version?

Photograph side-retainer engagement and the mounting area around overall corner curvature. Combine those images with vehicle identification data for review.

What information helps confirm availability?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Add vehicle details so availability and packing can be checked against the requested version.