92201-A0100 / 92202-A0100 Fog Light for Hyundai I30 ’12 / Ix25 / Creta

Fog Light for Hyundai I30 ’12 / Ix25 / Creta: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the lighting inspection group.

Product Specifications

Pre-Order Inspection

This fog light is associated with Hyundai I30 ’12 / Ix25 / Creta. Write 92201-A0100 / 92202-A0100 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Replacement Selection Guide

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The receiving technician should cross-check mounting tabs around the housing, cross-check left or right installation position, and evaluate electrical plug and pin layout before the replacement is test-positioned. This route applies to the fog light shown for Hyundai I30 ’12 / Ix25 / Creta.

If images accompany the enquiry, include an installation-opening picture, a chassis-plate image, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with installation-opening picture to cross-check mounting tabs around the housing. A second image should show clearance beside bumper and grille from chassis-plate image. Before the replacement is test-positioned, cross-check electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai I30 ’12 / Ix25 / Creta vehicle record.

The installation team should confirm electrical plug and pin layout from an upper-edge image, then cross-check lens profile and outer edge before the packing plan is prepared. The installation team should capture left or right installation position from a removed-part overview, then cross-check mounting tabs around the housing before the repair schedule is finalized. The repair planner should evaluate electrical plug and pin layout from an original-label photograph, then align electrical plug and pin layout before the vehicle is dismantled. The receiving technician should compare mounting tabs around the housing from an installation-opening picture, then align mounting tabs around the housing before the purchase order is issued.

Installation Planning

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. No packing entry is published here; request current carton and quantity information with the quotation.

Component Matching Record

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

Application information points to Hyundai I30 ’12 / Ix25 / Creta. A workshop should still compare the removed item and mounting location before ordering.

How is the pictured version best verified?

Check mounting tabs around the housing, confirm clearance beside bumper and grille, and retain the removed part until the replacement has been compared side by side.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Keep each requested product on a separate line when several parts share one shipment.