Rear Bumper Bracket for Hyundai I20 ’18 / I30 ’09

Rear Bumper Bracket for Hyundai I20 ’18 / I30 ’09: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Configuration Check

This rear bumper bracket is associated with Hyundai I20 ’18 / I30 ’09. No OEM number is stated, so identification should rely on the vehicle record, photograph and mounting layout. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

A workshop estimator should capture lamp or grille openings, review side-retainer engagement, and verify bracket and bolt-hole spacing before the delivery plan is confirmed. This route applies to the rear bumper bracket shown for Hyundai I20 ’18 / I30 ’09.

If images accompany the enquiry, include an original-label photograph, a chassis-plate image, and an adjacent-panel image. Label the evidence with the vehicle designation Hyundai I20 ’18 / I30 ’09 so the workshop and purchasing team review one configuration.

A workshop estimator can begin with original-label photograph to capture lamp or grille openings. A second image should show upper edge alignment below the lamps from chassis-plate image. Before the delivery plan is confirmed, review bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai I20 ’18 / I30 ’09 vehicle record.

The repair planner should trace side-retainer engagement from a vehicle-side photograph, then trace bracket and bolt-hole spacing before the carton is allocated. A workshop estimator should capture lamp or grille openings from an original-label photograph, then review lamp or grille openings before the delivery plan is confirmed. The installation team should capture upper edge alignment below the lamps from an installation-opening picture, then inspect upper edge alignment below the lamps before the shipment is booked. The importing distributor should compare overall corner curvature from a removed-part overview, then verify bracket and bolt-hole spacing before the carton is allocated.

Vehicle Confirmation

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Physical Fitment Points

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle is this component listed for?

The recorded application is Hyundai I20 ’18 / I30 ’09. Confirm trim, market specification and the removed rear bumper bracket before purchase.

How can an incorrect order be avoided?

Use the old component to check lamp or grille openings and upper edge alignment below the lamps. Also state the installation side or position in the enquiry.

How should a wholesale request be submitted?

A complete sourcing request names the quantity, delivery market and the comparison information used. Add vehicle details so availability and packing can be checked against the requested version.