86511-1J500 Front Bumper for Hyundai I20 ’12 / I20 ’16

Front Bumper for Hyundai I20 ’12 / I20 ’16: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Application Review

This front bumper is associated with Hyundai I20 ’12 / I20 ’16. Use 86511-1J500 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The importing distributor should cross-check overall corner curvature, review bracket and bolt-hole spacing, and confirm upper edge alignment below the lamps before the installation begins. This route applies to the front bumper shown for Hyundai I20 ’12 / I20 ’16.

If images accompany the enquiry, include an installation-opening picture, a fixing-point close-up, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with installation-opening picture to cross-check overall corner curvature. A second image should show lamp or grille openings from fixing-point close-up. Before the installation begins, review upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai I20 ’12 / I20 ’16 vehicle record.

A collision-repair specialist should inspect side-retainer engagement from a vehicle-side photograph, then inspect upper edge alignment below the lamps before the packing plan is prepared. The maintenance supervisor should record bracket and bolt-hole spacing from a full component outline, then cross-check lamp or grille openings before the replacement is test-positioned. The service adviser should note bracket and bolt-hole spacing from a rear mounting view, then assess side-retainer engagement before the commercial request is submitted. The receiving technician should confirm bracket and bolt-hole spacing from a removed-part overview, then capture lamp or grille openings before the vehicle is dismantled.

Workshop Comparison

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which Hyundai model does this page cover?

The associated model designation is Hyundai I20 ’12 / I20 ’16. Confirm the body or electrical configuration relevant to this front bumper.

How should fitment be checked before ordering?

Use the old component to check overall corner curvature and lamp or grille openings. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Include clear original-part photographs when the exact configuration needs further review.