86531-K6410 Front Bumper Grille for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

Front Bumper Grille for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This front bumper grille is associated with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Compare 86531-K6410 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The stock controller should review bracket and bolt-hole spacing, confirm lamp or grille openings, and mark overall corner curvature before the stock request is released. This route applies to the front bumper grille shown for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d.

If images accompany the enquiry, include an underside image, an installation-opening picture, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with underside image to review bracket and bolt-hole spacing. A second image should show side-retainer engagement from installation-opening picture. Before the stock request is released, confirm overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d vehicle record.

The parts coordinator should evaluate upper edge alignment below the lamps from an underside image, then note upper edge alignment below the lamps before the replacement is test-positioned. The repair planner should mark upper edge alignment below the lamps from a fixing-point close-up, then cross-check upper edge alignment below the lamps before the delivery plan is confirmed. The procurement contact should mark bracket and bolt-hole spacing from a full component outline, then evaluate overall corner curvature before the vehicle is dismantled. A workshop estimator should capture lamp or grille openings from a rear mounting view, then document overall corner curvature before the purchase order is issued.

Part Recognition Guide

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Application Review

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What vehicle information should be checked first?

This front bumper grille appears under Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Review the exact vehicle version rather than relying on the model name by itself.

What evidence is useful for a fitment review?

Review bracket and bolt-hole spacing first, then inspect side-retainer engagement on the vehicle. Clear photographs help the supplier assess the required version.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Packing and freight can be discussed after the component version has been identified.