86560-B4810 Front Bumper Grille for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d

Front Bumper Grille for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This front bumper grille is associated with Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. Include 86560-B4810 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The importing distributor should measure upper edge alignment below the lamps, align overall corner curvature, and verify side-retainer engagement before the packing plan is prepared. This route applies to the front bumper grille shown for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d.

If images accompany the enquiry, include a connector close-up, a fixing-point close-up, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with connector close-up to measure upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fixing-point close-up. Before the packing plan is prepared, align side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d vehicle record.

The parts coordinator should record upper edge alignment below the lamps from a lower-retainer view, then trace side-retainer engagement before the quotation is approved. The repair planner should confirm overall corner curvature from a fixing-point close-up, then compare lamp or grille openings before the repair schedule is finalized. The maintenance supervisor should confirm upper edge alignment below the lamps from a vehicle-side photograph, then trace overall corner curvature before the delivery plan is confirmed. The repair planner should review upper edge alignment below the lamps from a straight-on view, then measure side-retainer engagement before the commercial request is submitted.

Vehicle-Side Evidence

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What is the listed vehicle application?

The recorded application is Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. Confirm trim, market specification and the removed front bumper grille before purchase.

How is the pictured version best verified?

Review upper edge alignment below the lamps first, then inspect bracket and bolt-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What information helps confirm availability?

A complete sourcing request names the quantity, delivery market and the comparison information used. This information helps separate technical confirmation from the later shipping calculation.