92403-B4700 / 92404-B4700 Inner Tail Light Assembly for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d

Inner Tail Light Assembly for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the lighting inspection group.

Product Specifications

Reference Check

This inner tail light assembly is associated with Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. Cross-check 92403-B4700 / 92404-B4700 against the removed item, paying attention to every prefix, suffix and character. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

A workshop estimator should measure electrical plug and pin layout, photograph mounting tabs around the housing, and verify lens profile and outer edge before the packing plan is prepared. This route applies to the inner tail light assembly shown for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d.

If images accompany the enquiry, include a vehicle-side photograph, an adjacent-panel image, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with vehicle-side photograph to measure electrical plug and pin layout. A second image should show left or right installation position from adjacent-panel image. Before the packing plan is prepared, photograph lens profile and outer edge and note any difference from the removed component. Keep these observations with the Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d vehicle record.

The maintenance supervisor should mark electrical plug and pin layout from a rear mounting view, then inspect left or right installation position before the shipment is booked. A workshop estimator should assess electrical plug and pin layout from an original-label photograph, then confirm electrical plug and pin layout before the quotation is approved. A body-shop buyer should align mounting tabs around the housing from a lower-retainer view, then document clearance beside bumper and grille before the delivery plan is confirmed. A vehicle inspector should capture lens profile and outer edge from a rear mounting view, then trace mounting tabs around the housing before the fitment decision is signed off.

Commercial Request Details

Measure questionable mounting distances before modifying any surrounding component. Recorded packing is 60 × 28 × 37CM / 10PCS; reconfirm current packing when freight is quoted.

Configuration Check

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What is the listed vehicle application?

The associated model designation is Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. Confirm the body or electrical configuration relevant to this inner tail light assembly.

What evidence is useful for a fitment review?

Ask the workshop to inspect electrical plug and pin layout together with left or right installation position. VIN or chassis information can clarify market-specific differences.

How can a trade buyer request pricing?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.