86511-B4000 Front Bumper for Hyundai I10 ‘2014 / I10 ‘2017

Front Bumper for Hyundai I10 ‘2014 / I10 ‘2017: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This front bumper is associated with Hyundai I10 ‘2014 / I10 ‘2017. Record 86511-B4000 and compare it with the old part before asking for availability. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should confirm bracket and bolt-hole spacing, review lamp or grille openings, and review overall corner curvature before the commercial request is submitted. This route applies to the front bumper shown for Hyundai I10 ‘2014 / I10 ‘2017.

If images accompany the enquiry, include an adjacent-panel image, an installation-opening picture, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with adjacent-panel image to confirm bracket and bolt-hole spacing. A second image should show side-retainer engagement from installation-opening picture. Before the commercial request is submitted, review overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai I10 ‘2014 / I10 ‘2017 vehicle record.

The maintenance supervisor should confirm side-retainer engagement from an upper-edge image, then mark upper edge alignment below the lamps before the quotation is approved. The parts coordinator should record overall corner curvature from a full component outline, then trace side-retainer engagement before the stock request is released. A vehicle inspector should record side-retainer engagement from a fixing-point close-up, then compare upper edge alignment below the lamps before the installation begins. The parts coordinator should confirm overall corner curvature from an upper-edge image, then capture lamp or grille openings before the replacement is test-positioned.

Purchase Preparation

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 170 × 42 × 65CM / 5PCS; reconfirm current packing when freight is quoted.

Fitment Evidence

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which vehicle record belongs with this product?

This front bumper appears under Hyundai I10 ‘2014 / I10 ‘2017. Review the exact vehicle version rather than relying on the model name by itself.

How is the pictured version best verified?

Use the old component to check bracket and bolt-hole spacing and side-retainer engagement. Also state the installation side or position in the enquiry.

How can a trade buyer request pricing?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Providing the vehicle record at the start reduces follow-up questions during quotation.