87721-B4000 / 87722-B4000 / 87731-B4000 / 87732-B4000 Body Moulding for Hyundai I10 ‘2014
- Retain the removed body moulding for workshop comparison
- Written references: 87721-B4000 / 87722-B4000 / 87731-B4000 / 87732-B4000
- Quotation input: quantity plus destination
- Match clip or fastener arrangement against the removed part
- Packing entry: 96 × 33 × 22CM / 10SET
- Evaluate visible contour and finish
- Workshop route: a vehicle inspector should cross-check visible contour and finish before the purchase order is issued
Body Moulding for Hyundai I10 ‘2014: A reliable quotation starts with a clear component description and physical comparison evidence. The component belongs to the trim inspection group.
Product Specifications
| Product name | Body Moulding |
|---|---|
| OEM replacement references | 87721-B4000 / 87722-B4000 / 87731-B4000 / 87732-B4000 |
| Vehicle model | Hyundai I10 ‘2014 |
| Component area | Trim |
| Primary comparison | visible contour and finish |
| Secondary comparison | base footprint |
| Packing information | 96 × 33 × 22CM / 10SET |
| Fitment confirmation | a vehicle inspector should cross-check clip or fastener arrangement before the purchase order is issued |
Commercial Request Details
This body moulding is associated with Hyundai I10 ‘2014. The numbers 87721-B4000 / 87722-B4000 / 87731-B4000 / 87732-B4000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.
Reference Check
- Visible contour and finish
- Mounting-hole spacing
- Base footprint
- Clip or fastener arrangement
- Door or bumper position
The stock controller should measure visible contour and finish from a lower-retainer view, then review door or bumper position before the quotation is approved. The procurement contact should document door or bumper position from a full component outline, then cross-check visible contour and finish before the quotation is approved. A collision-repair specialist should mark visible contour and finish from a vehicle-side photograph, then note mounting-hole spacing before the replacement is test-positioned. The installation team should note mounting-hole spacing from an upper-edge image, then cross-check door or bumper position before the carton is allocated.
Inspection Route
Trial-position the component with nearby trim loosened only as required by workshop procedure. Recorded packing is 96 × 33 × 22CM / 10SET; reconfirm current packing when freight is quoted.
Vehicle Confirmation
Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.
Product Questions and Answers
Which Hyundai model does this page cover?
This page associates the body moulding with Hyundai I10 ‘2014. The vehicle record and original component should agree with the pictured version.
What should be compared with the removed component?
Compare visible contour and finish, base footprint and the required installation position with the removed component. VIN or chassis details add another useful check.
What information is needed for a quotation?
Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. This information helps separate technical confirmation from the later shipping calculation.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
