86511-0X210 Front Bumper for Hyundai I10 ’11 / I10 ‘2014

Front Bumper for Hyundai I10 ’11 / I10 ‘2014: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This front bumper is associated with Hyundai I10 ’11 / I10 ‘2014. Compare 86511-0X210 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Technical Comparison Notes

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The stock controller should confirm bracket and bolt-hole spacing, note lamp or grille openings, and align overall corner curvature before the packing plan is prepared. This route applies to the front bumper shown for Hyundai I10 ’11 / I10 ‘2014.

If images accompany the enquiry, include an adjacent-panel image, an installation-opening picture, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with adjacent-panel image to confirm bracket and bolt-hole spacing. A second image should show side-retainer engagement from installation-opening picture. Before the packing plan is prepared, note overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai I10 ’11 / I10 ‘2014 vehicle record.

A collision-repair specialist should measure bracket and bolt-hole spacing from a removed-part overview, then mark side-retainer engagement before the vehicle is dismantled. The stock controller should mark bracket and bolt-hole spacing from a rear mounting view, then inspect bracket and bolt-hole spacing before the replacement is test-positioned. The maintenance supervisor should note lamp or grille openings from a fastener detail, then inspect side-retainer engagement before the carton is allocated. The service adviser should measure side-retainer engagement from a chassis-plate image, then evaluate upper edge alignment below the lamps before the fitment decision is signed off.

Purchase Preparation

Installation should follow the vehicle repair manual and use serviceable original-style fasteners. Recorded packing is 166 × 50 × 63CM / 5PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which Hyundai model does this page cover?

The associated model designation is Hyundai I10 ’11 / I10 ‘2014. Confirm the body or electrical configuration relevant to this front bumper.

How should fitment be checked before ordering?

Photograph bracket and bolt-hole spacing and the mounting area around side-retainer engagement. Combine those images with vehicle identification data for review.

What information helps confirm availability?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Add vehicle details so availability and packing can be checked against the requested version.