92101-5H000 / 92102-5H000 Headlight Assembly for Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty

Headlight Assembly for Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the lighting inspection group.

Product Specifications

Inspection Route

This headlight assembly is associated with Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty. Reference matching begins with 92101-5H000 / 92102-5H000; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The installation team should confirm mounting tabs around the housing, trace left or right installation position, and mark electrical plug and pin layout before the replacement is test-positioned. This route applies to the headlight assembly shown for Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty.

If images accompany the enquiry, include an original-label photograph, a fixing-point close-up, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with original-label photograph to confirm mounting tabs around the housing. A second image should show clearance beside bumper and grille from fixing-point close-up. Before the replacement is test-positioned, trace electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty vehicle record.

The procurement contact should measure mounting tabs around the housing from a chassis-plate image, then confirm electrical plug and pin layout before the carton is allocated. A workshop estimator should note lens profile and outer edge from a connector close-up, then document electrical plug and pin layout before the shipment is booked. The receiving technician should measure electrical plug and pin layout from a lower-retainer view, then evaluate left or right installation position before the purchase order is issued. A collision-repair specialist should document electrical plug and pin layout from a chassis-plate image, then trace mounting tabs around the housing before the purchase order is issued.

Purchase Preparation

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. Recorded packing is 59 × 34 × 67CM / 6PCS; reconfirm current packing when freight is quoted.

Replacement Selection Guide

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What is the listed vehicle application?

This headlight assembly is listed for Hyundai Ix35 ’13-’16 / Hd65 / Hd75 / Mighty. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

Review mounting tabs around the housing first, then inspect clearance beside bumper and grille on the vehicle. Clear photographs help the supplier assess the required version.

How can a trade buyer request pricing?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. This information helps separate technical confirmation from the later shipping calculation.