86610-4A500 Rear Bumper for Hyundai Starles / Starex

Rear Bumper for Hyundai Starles / Starex: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This rear bumper is associated with Hyundai Starles / Starex. Include 86610-4A500 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The procurement contact should compare lamp or grille openings, trace side-retainer engagement, and inspect bracket and bolt-hole spacing before the purchase order is issued. This route applies to the rear bumper shown for Hyundai Starles / Starex.

If images accompany the enquiry, include a straight-on view, a removed-part overview, and an upper-edge image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with straight-on view to compare lamp or grille openings. A second image should show upper edge alignment below the lamps from removed-part overview. Before the purchase order is issued, trace bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Starles / Starex vehicle record.

The repair planner should evaluate side-retainer engagement from a full component outline, then evaluate overall corner curvature before the shipment is booked. The installation team should evaluate lamp or grille openings from a lower-retainer view, then note overall corner curvature before the repair schedule is finalized. The importing distributor should cross-check side-retainer engagement from a full component outline, then review upper edge alignment below the lamps before the installation begins. A vehicle inspector should confirm overall corner curvature from a straight-on view, then review bracket and bolt-hole spacing before the purchase order is issued.

Reference Check

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 190 × 50 × 45CM / 5PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

The listing covers Hyundai Starles / Starex. Because configurations may vary, check the actual installation area before approving the rear bumper.

What should be compared with the removed component?

Use the old component to check lamp or grille openings and upper edge alignment below the lamps. Also state the installation side or position in the enquiry.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. State the required side or installation position where that detail applies.