86611-43300 Rear Bumper for Hyundai H100panel Van’93-’95 / H100panel Van’96

Rear Bumper for Hyundai H100panel Van’93-’95 / H100panel Van’96: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This rear bumper is associated with Hyundai H100panel Van’93-’95 / H100panel Van’96. The OEM entry 86611-43300 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A body-shop buyer should cross-check overall corner curvature, compare bracket and bolt-hole spacing, and mark upper edge alignment below the lamps before the stock request is released. This route applies to the rear bumper shown for Hyundai H100panel Van’93-’95 / H100panel Van’96.

If images accompany the enquiry, include a connector close-up, a vehicle-side photograph, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with connector close-up to cross-check overall corner curvature. A second image should show lamp or grille openings from vehicle-side photograph. Before the stock request is released, compare upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai H100panel Van’93-’95 / H100panel Van’96 vehicle record.

The stock controller should assess upper edge alignment below the lamps from an installation-opening picture, then cross-check upper edge alignment below the lamps before the delivery plan is confirmed. The parts coordinator should trace upper edge alignment below the lamps from a removed-part overview, then mark upper edge alignment below the lamps before the replacement is test-positioned. The installation team should trace upper edge alignment below the lamps from a corner-profile view, then confirm side-retainer engagement before the repair schedule is finalized. The parts coordinator should inspect overall corner curvature from a connector close-up, then confirm side-retainer engagement before the installation begins.

Technical Comparison Notes

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. Recorded packing is 165 × 28 × 31CM / 5PCS; reconfirm current packing when freight is quoted.

Fitment Evidence

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What is the listed vehicle application?

The recorded application is Hyundai H100panel Van’93-’95 / H100panel Van’96. Confirm trim, market specification and the removed rear bumper before purchase.

Which details help confirm the correct version?

Compare overall corner curvature, lamp or grille openings and the required installation position with the removed component. VIN or chassis details add another useful check.

How should a wholesale request be submitted?

A complete sourcing request names the quantity, delivery market and the comparison information used. Keep each requested product on a separate line when several parts share one shipment.