86511-43300 Front Bumper for Hyundai H100panel Van’93-’95 / H100panel Van’96

Front Bumper for Hyundai H100panel Van’93-’95 / H100panel Van’96: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Purchase Preparation

This front bumper is associated with Hyundai H100panel Van’93-’95 / H100panel Van’96. Reference matching begins with 86511-43300; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Technical Comparison Notes

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The stock controller should note upper edge alignment below the lamps, review overall corner curvature, and evaluate side-retainer engagement before the purchase order is issued. This route applies to the front bumper shown for Hyundai H100panel Van’93-’95 / H100panel Van’96.

If images accompany the enquiry, include a fixing-point close-up, an upper-edge image, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with fixing-point close-up to note upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from upper-edge image. Before the purchase order is issued, review side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai H100panel Van’93-’95 / H100panel Van’96 vehicle record.

The maintenance supervisor should inspect side-retainer engagement from an original-label photograph, then review overall corner curvature before the packing plan is prepared. The installation team should verify side-retainer engagement from an underside image, then confirm bracket and bolt-hole spacing before the shipment is booked. The importing distributor should measure lamp or grille openings from a vehicle-side photograph, then document bracket and bolt-hole spacing before the commercial request is submitted. A collision-repair specialist should assess side-retainer engagement from an installation-opening picture, then photograph upper edge alignment below the lamps before the fitment decision is signed off.

Fitment Evidence

Arrange a dry comparison before final fastening, and stop if holes or clips need force to line up. Recorded packing is 176 × 26 × 39CM / 5PCS; reconfirm current packing when freight is quoted.

Commercial Request Details

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

How should the model application be interpreted?

This page associates the front bumper with Hyundai H100panel Van’93-’95 / H100panel Van’96. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

The practical checks are upper edge alignment below the lamps, bracket and bolt-hole spacing and the surrounding clearance. Avoid choosing the item from the model name alone.

What information is needed for a quotation?

A complete sourcing request names the quantity, delivery market and the comparison information used. The supplier can then review the product version, carton requirements and delivery options.