92101-43810 / 92102-43810 Headlight Assembly Crystal for Hyundai H100panel Van’93-’95 / H100panel Van’96

Headlight Assembly Crystal for Hyundai H100panel Van’93-’95 / H100panel Van’96: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Vehicle Confirmation

This headlight assembly crystal is associated with Hyundai H100panel Van’93-’95 / H100panel Van’96. Record 92101-43810 / 92102-43810 and compare it with the old part before asking for availability. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A collision-repair specialist should compare mounting tabs around the housing, capture left or right installation position, and photograph electrical plug and pin layout before the carton is allocated. This route applies to the headlight assembly crystal shown for Hyundai H100panel Van’93-’95 / H100panel Van’96.

If images accompany the enquiry, include a vehicle-side photograph, a fastener detail, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with vehicle-side photograph to compare mounting tabs around the housing. A second image should show clearance beside bumper and grille from fastener detail. Before the carton is allocated, capture electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai H100panel Van’93-’95 / H100panel Van’96 vehicle record.

The receiving technician should review electrical plug and pin layout from an upper-edge image, then compare left or right installation position before the stock request is released. The installation team should mark mounting tabs around the housing from a chassis-plate image, then evaluate lens profile and outer edge before the delivery plan is confirmed. The stock controller should cross-check lens profile and outer edge from a connector close-up, then cross-check left or right installation position before the stock request is released. A body-shop buyer should photograph clearance beside bumper and grille from a straight-on view, then measure left or right installation position before the stock request is released.

Pre-Order Inspection

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. Recorded packing is 61 × 50 × 48CM / 6PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What is the listed vehicle application?

The stated vehicle is Hyundai H100panel Van’93-’95 / H100panel Van’96. Treat that model label as one part of the fitment check, together with photographs and chassis details.

Which details help confirm the correct version?

The practical checks are mounting tabs around the housing, clearance beside bumper and grille and the surrounding clearance. Avoid choosing the item from the model name alone.

How should a wholesale request be submitted?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. State the required side or installation position where that detail applies.