86811-2W000 / 86812-2W000 Inner Lining for Hyundai Santa Fe ’13

Inner Lining for Hyundai Santa Fe ’13: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the body inspection group.

Product Specifications

Vehicle-Side Evidence

This inner lining is associated with Hyundai Santa Fe ’13. Write 86811-2W000 / 86812-2W000 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Application Review

• Bolt and clip locations
• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour

The parts coordinator should assess bolt and clip locations, measure wheel-arch or lamp clearance, and confirm panel contour before the purchase order is issued. This route applies to the inner lining shown for Hyundai Santa Fe ’13.

If images accompany the enquiry, include a straight-on view, a full component outline, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with straight-on view to assess bolt and clip locations. A second image should show opening and hole pattern from full component outline. Before the purchase order is issued, measure panel contour and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe ’13 vehicle record.

A collision-repair specialist should document opening and hole pattern from a straight-on view, then note opening and hole pattern before the shipment is booked. A collision-repair specialist should document left or right orientation from a rear mounting view, then align wheel-arch or lamp clearance before the packing plan is prepared. A workshop estimator should mark panel contour from a full component outline, then compare panel contour before the quotation is approved. The importing distributor should cross-check panel contour from a connector close-up, then confirm panel contour before the stock request is released.

Installation Planning

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Ordering Information

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What is the listed vehicle application?

This inner lining is listed for Hyundai Santa Fe ’13. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Review bolt and clip locations first, then inspect opening and hole pattern on the vehicle. Clear photographs help the supplier assess the required version.

How can a trade buyer request pricing?

Send the order volume and destination together with VIN or chassis information where available. Keep each requested product on a separate line when several parts share one shipment.