86515-2B000 / 86516-2B000 Front Bumper Bracket for Hyundai Santa Fe’07-’08

Front Bumper Bracket for Hyundai Santa Fe’07-’08: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This front bumper bracket is associated with Hyundai Santa Fe’07-’08. Treat 86515-2B000 / 86516-2B000 as an identification route, then validate the component at the actual mounting area. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The procurement contact should compare upper edge alignment below the lamps, trace overall corner curvature, and cross-check side-retainer engagement before the installation begins. This route applies to the front bumper bracket shown for Hyundai Santa Fe’07-’08.

If images accompany the enquiry, include a connector close-up, a chassis-plate image, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with connector close-up to compare upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from chassis-plate image. Before the installation begins, trace side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe’07-’08 vehicle record.

A vehicle inspector should align upper edge alignment below the lamps from a straight-on view, then inspect overall corner curvature before the repair schedule is finalized. The importing distributor should compare bracket and bolt-hole spacing from a fixing-point close-up, then capture lamp or grille openings before the carton is allocated. A vehicle inspector should review upper edge alignment below the lamps from a removed-part overview, then photograph lamp or grille openings before the delivery plan is confirmed. A vehicle inspector should compare side-retainer engagement from a connector close-up, then confirm bracket and bolt-hole spacing before the installation begins.

Repair Planning Notes

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. No packing entry is published here; request current carton and quantity information with the quotation.

Commercial Request Details

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What is the listed vehicle application?

This front bumper bracket is listed for Hyundai Santa Fe’07-’08. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Review upper edge alignment below the lamps first, then inspect bracket and bolt-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What information helps confirm availability?

A complete sourcing request names the quantity, delivery market and the comparison information used. State the required side or installation position where that detail applies.