86630-C1000 Rear Bumper Support for Hyundai Sonata ’14

Rear Bumper Support for Hyundai Sonata ’14: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This rear bumper support is associated with Hyundai Sonata ’14. The numbers 86630-C1000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The parts coordinator should record side-retainer engagement, cross-check upper edge alignment below the lamps, and measure lamp or grille openings before the vehicle is dismantled. This route applies to the rear bumper support shown for Hyundai Sonata ’14.

If images accompany the enquiry, include an installation-opening picture, an upper-edge image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with installation-opening picture to record side-retainer engagement. A second image should show overall corner curvature from upper-edge image. Before the vehicle is dismantled, cross-check lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’14 vehicle record.

The installation team should capture overall corner curvature from a fastener detail, then photograph lamp or grille openings before the replacement is test-positioned. The receiving technician should trace side-retainer engagement from a rear mounting view, then record overall corner curvature before the quotation is approved. A vehicle inspector should note side-retainer engagement from a lower-retainer view, then compare upper edge alignment below the lamps before the repair schedule is finalized. The installation team should verify side-retainer engagement from a connector close-up, then mark lamp or grille openings before the shipment is booked.

Technical Comparison Notes

Photograph the original arrangement before removal when several brackets or connectors are involved. Recorded packing is 142 × 18 × 18 / 1PCS; reconfirm current packing when freight is quoted.

Reference Check

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What vehicle information should be checked first?

The associated model designation is Hyundai Sonata ’14. Confirm the body or electrical configuration relevant to this rear bumper support.

How should fitment be checked before ordering?

Photograph side-retainer engagement and the mounting area around overall corner curvature. Combine those images with vehicle identification data for review.

What information is needed for a quotation?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.