86517-3S000 Hook Cap-Front Bumper for Hyundai Sonata ’11-’13

Hook Cap-Front Bumper for Hyundai Sonata ’11-’13: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This hook cap-front bumper is associated with Hyundai Sonata ’11-’13. For purchasing documents, quote 86517-3S000 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Inspection Route

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A vehicle inspector should note overall corner curvature, compare bracket and bolt-hole spacing, and assess upper edge alignment below the lamps before the replacement is test-positioned. This route applies to the hook cap-front bumper shown for Hyundai Sonata ’11-’13.

If images accompany the enquiry, include a fixing-point close-up, a corner-profile view, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with fixing-point close-up to note overall corner curvature. A second image should show lamp or grille openings from corner-profile view. Before the replacement is test-positioned, compare upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’11-’13 vehicle record.

The importing distributor should review lamp or grille openings from a straight-on view, then review upper edge alignment below the lamps before the replacement is test-positioned. A collision-repair specialist should compare upper edge alignment below the lamps from an original-label photograph, then inspect side-retainer engagement before the fitment decision is signed off. A vehicle inspector should evaluate upper edge alignment below the lamps from a side-profile photograph, then assess side-retainer engagement before the packing plan is prepared. A workshop estimator should align side-retainer engagement from a removed-part overview, then compare lamp or grille openings before the carton is allocated.

Ordering Information

Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. No packing entry is published here; request current carton and quantity information with the quotation.

Replacement Selection Guide

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

This hook cap-front bumper appears under Hyundai Sonata ’11-’13. Review the exact vehicle version rather than relying on the model name by itself.

How can an incorrect order be avoided?

Compare overall corner curvature, lamp or grille openings and the required installation position with the removed component. VIN or chassis details add another useful check.

What should be included in a B2B enquiry?

A complete sourcing request names the quantity, delivery market and the comparison information used. Providing the vehicle record at the start reduces follow-up questions during quotation.